Our friends at Merit Partners, recently acquired this beautiful '72 Porsche 911S adorned in Light Yellow. With only 72,xxx miles on the clock and a two owner car, it was very well maintained. It needed a little lovin' from our guys to bring it back to its best conditions possible. We were asked to do a thorough inspection of the suspension components, wheels, exterior paint, engine bay and interior. Continue reading below to see the full detailing process. Also, if you're interested in owning this 911S, it is FOR SALE!As you can see in the images below, the paint had minor swirls and scratches. Our team quickly assessed what polishing process we needed to perform to bring this Light Yellow paint back to life!Let the polishing begin!We fully inspected the interior, engine bay, wheels and suspension. The interior needed some minor vacuuming and dusting. In the engine bay, it was very well maintained! We had to spot clean a few areas but nothing too intensive. Lastly, we took off the wheels to inspect each one and thoroughly clean them. While the wheels were off, we were abl [...]
One of our customers wanted to get some old paint protection film removed off of his recently purchased GT3. The film that was installed previously was starting to deteriorate and he wanted it gone. We removed the old film along with all of residue left behind. Up next, we performed a 1.5 - Step Paint Correction to get the paint looking better than the day it rolled off the showroom floor. After the compound/polishing process was completed, we installed our Full Front End Protection Package using XPEL Ultimate's self healing film! Not only did he want to have his vehicle protected from road/track abuse he also wanted to keep it looking freshly detailed and easier to maintain for several years to come. We applied the CQuartz Professional ceramic coating to all painted exterior surfaces, wheel faces, wheel barrels and brake calipers! This coating will last 2-3 years and give his GT3 that "freshly waxed" look every time he steps into his garage to take her for a spin.
Four Five Eight! We completed a laundry list of our services on our customer's Ferrari 458. First off, we removed the old paint protection film that was on deteriorating on the front bumper and performed a 1-Step Polish to remove any film residue / light swirls and scratches. We added a Full Front End Protection package which includes the full hood, full fenders, headlights, front bumper and side mirrors. After the film was applied, we coated all painted exterior surfaces and on top of the XPEL film. Additionally, we powder coated the wheels matte black to give this Ferrari a more sportier look. While the wheels were off getting coated, we had the tires dismounted and put brand new Michelin Pilot Super Sport tires on the freshly powder coated wheels. This Ferrari 458 not only has a new look but it's also protected from any future road damage!
There aren't many cars out on the streets these days that sound like a Mustang! Our customer wanted to take his 5.2L Shelby GT350 to the next level by adding a Borla ATAK Exhaust System!Take a peek at what the factory exhaust looks like. The OEM exhaust outlets will still be used with the new Borla ATAK exhaust system.Shelby GT350's come with a valved exhaust system from the factory. The little black box attached to the top of the factory muffler is the valve actuator. It is held on by a couple of screws. We simply took the actuator off of the old muffler and placed them on the new Borla mufflers to retain the functionality of the valves. Even though the muffler outside appearance seems to be the same, its what is on the inside that counts. The Borla muffler features a "straight through" design which allows more air flow. Increased air flow results in a minor horsepower/torque bump!
After the exhaust was installed, the customer wanted to have his Grabber Blue GT350 all cleaned up for the weekend. We took her out back and hos [...]
The demand for the GT3RS continues to grow as individuals are having to wait, several months to a couple of years, to get their hands on one of Porsche's most sought after machines. Our customer took delivery of his Ultraviolet Purple GT3RS and immediately brought it to us to protect his investment. He wanted to get the entire vehicle protected with XPEL Ultimate self healing paint protection film. We covered every inch of the vehicle with XPEL! Continue reading to see the process and final outcome of this beautiful example of automotive machinery.
CONTACT us today for your free estimate!
Every vehicle gets an initial wash to remove any surface debris so we can properly identify and address any imperfections on the paints surface. Most people think that their new vehicle will arrive to them in near perfect condition. It's not very often we see a vehicle arrive to our facility from the dealer in near perfect condition. That's where we step in!
After the initial wash, we can see the imperfections on the paint surface. Minor swirls and scratches are scattered across the entire vehicle. Since this GT3RS is getting full body XPEL coverage, we needed to fully polish th [...]
Recently we had this 5th Gen Competition Blue Dodge Viper GT in our facility to receive a New Car Prep, XPEL Ultimate Full Front End Protection and CQuartz Professional Ceramic Paint Coating. Keep in mind, this is a brand new Dodge Viper that was sold by Sean @ Palmer Dodge. We have seen many Vipers come straight from the manufacturer in horrendous condition. A perfect example is the Nardo Grey ACR Viper we recently performed the same services on. This particular one isn't the worst one we have seen but the color helps hide some of the imperfections. After we complete our initial wash, we bring the vehicles into our detail bay to address the condition of the paint.
This Viper had a few imperfections which included; light scratches, holograms and swirls. Our New Car Prep (1-step polish) would suffice! After the car has been fully polished, we then move to our paint protection booth where the XPEL clear bra is installed.
We applied the CQuartz Professional ceramic coating to all painted exterior surfaces and the parts of the car that had XPEL installed. Enjoy the process an [...]
One of our most recent customers, has been building this Pontiac GTO for several years now. It has been in and out of multiple shops getting a full rotisserie restoration. Since he has devoted a huge chunk of time and money, into this GTO, he wanted the final piece of the puzzle to be a paint correction and Cquartz ceramic coating to keep the car looking freshly waxed for many years to come. We also recommended getting his new vinyl top coated to give it that rich black look!
In order for us to properly gauge what compounds, pads and polishes we need to use to correct the paint, we needed to do a few test spots. We thought a 1-step polish would be sufficient enough but we found a 1.5 step polish was the better option. After the polishing was all completed we moved on to the ceramic coating process!
Our customer wanted to keep his freshly built GTO looking "car show" ready at all times! We applied a OptiGuard's Leather and Vinyl coating to the top and Cquartz Finest ceramic paint coating to all painted exterior surfaces. Not only will the vehicle have a "just waxed" look for several years to come but it will also be very easy to maintain throughout the coatings lifespan. The differences between the non-coated top and coated [...
Our customer brought us his brand new, Plum Crazy Purple, Dodge Viper to us wanting to protect his investment. We recommended having the full front covered in Xpel's Ultimate line of paint protection film. This particular clear bra has a self healing property which helps keep your vehicle looking pristine. He wanted to take it a step further and get CQuartz Finest Reserve applied to his brand new Viper. Reserve is CarPro's latest coating technology. It has a life expectancy of 3-5 years and has an even glossier finish than it's predecessor, CQuartz Finest.
The entire front end was protected with Xpel Ultimate self healing film and the rocker panels. The hood on Vipers are so large that the pieces have to be installed in 3 pieces!
Keep reading to see the entire process involved in making this Viper SHINE!
This is the condition of the paint when it arrived to us straight from the dealership showroom floor. There are numerous light scratches found throughout the paint. We took care of these light scratches and swirls while performing our New Car Prep. The New Car Prep is a necessary step for any coating application we have. This process gets rid of most light scratches/swirl marks, decontaminates the paint and most of all br [..
The new Panamera's have been trickling into a few dealerships around Atlanta. We were fortunate enough to get our hands on one fairly quickly! Our customer wanted to protect his investment by choosing to do a full front end coverage with Xpel Ultimate self healing paint protection film. The full front end includes; full hood, full fenders, side mirrors and the front bumper. With all of the construction going on around Metro Atlanta it was a very wise decision to make! We tell all of our customers clear bra is essentially a small insurance investment that will most likely stay on the car well past your time of ownership with it. Please check out some images of the install and after images of this new 2017 Porsche Panamera Turbo!
Each vehicle is properly prepped before the installation begins. First, we have a dedicated area for the installation process to help control the environment around the vehicle. This minimizes the chance of debris getting onto the film or paints surface during the application process. Each panel is cleaned with alcohol and squeegee'd thoroughly to remove any contaminants or residue that may be on the paint surface. Some of our customers choose to have their paint polished to get rid of any nasty swirls [
Have you ever seen a 800hp C7 Corvette from the factory? Well look no further! We had the opportunity to apply some of our services on this brand new #01 of 50 C7 Grand Sport. Our customer just bought this vehicle and wanted to protect his investment. We decided to perform our New Car Prep, Xpel clear bra and window tint. The New Car Prep was recommended to remove any swirls/scratches, decontaminate the paint and help bring a deep gloss out of the factory black paint. Since we just polished the paint, Xpel Ultimate Self Healing clear bra was applied to the front end of the vehicle to protect it from any rock chips or road debris. Lastly, we couldn't have our customer fish bowlin' around town so we add some Suntek Carbon window film! Continue reading below to see the entire process and some images after all of our work was complete!
Straight from the dealership, this vehicle had some slight scratches, swirls and water spots. Since this vehicle is getting Xpel film on it. We needed to proceed with our New Car Prep first so the paint surface was perfect before the protective film was applied. The images below show you how the vehicle arrived to us.
The first step in the entire process is to thoroughly wash and clay the vehicl [.