Our customer brought us his brand new, Plum Crazy Purple, Dodge Viper to us wanting to protect his investment. We recommended having the full front covered in Xpel's Ultimate line of paint protection film. This particular clear bra has a self healing property which helps keep your vehicle looking pristine. He wanted to take it a step further and get CQuartz Finest Reserve applied to his brand new Viper. Reserve is CarPro's latest coating technology. It has a life expectancy of 3-5 years and has an even glossier finish than it's predecessor, CQuartz Finest.
The entire front end was protected with Xpel Ultimate self healing film and the rocker panels. The hood on Vipers are so large that the pieces have to be installed in 3 pieces!
Keep reading to see the entire process involved in making this Viper SHINE!
This is the condition of the paint when it arrived to us straight from the dealership showroom floor. There are numerous light scratches found throughout the paint. We took care of these light scratches and swirls while performing our New Car Prep. The New Car Prep is a necessary step for any coating application we have. This process gets rid of most light scratches/swirl marks, decontaminates the paint and most of all br [..
"NSX has always provoked an intense reaction. And when it’s driven, the response is unparalleled. This is a car created with and for emotion, engineered to become an extension of its driver with such fidelity, it’s hard to find the line between man and machine." -Acura.Every vehicle that comes in for paint protection film or polishing must receive a preliminary wash to get rid of any dirt and debris that might be on the paints surface. We use only the finest car washing materials and products during this process from CarPro USA! All vehicles receive a proper 2-bucket wash and our dried with plush microfiber drying towels.Our customer wanted to protect his investment! The best way to do that is to use Xpel Ultimate self healing film to protect the high impact areas from road debris. We covered the full front end, rocker panels, rear wheel impact and a-pillar/partial roof. This Acura NSX came from the factory with some paint protection film already installed on the rocker panels. This pre-installed film tends to yellow very quickly and is usually a lesser quality film. We recommended replacing these with Xpel Ultimate self healing film like the rest of the vehicle was getting.After the Xpel has been installed, we proceeded the n [.
The new Panamera's have been trickling into a few dealerships around Atlanta. We were fortunate enough to get our hands on one fairly quickly! Our customer wanted to protect his investment by choosing to do a full front end coverage with Xpel Ultimate self healing paint protection film. The full front end includes; full hood, full fenders, side mirrors and the front bumper. With all of the construction going on around Metro Atlanta it was a very wise decision to make! We tell all of our customers clear bra is essentially a small insurance investment that will most likely stay on the car well past your time of ownership with it. Please check out some images of the install and after images of this new 2017 Porsche Panamera Turbo!
Each vehicle is properly prepped before the installation begins. First, we have a dedicated area for the installation process to help control the environment around the vehicle. This minimizes the chance of debris getting onto the film or paints surface during the application process. Each panel is cleaned with alcohol and squeegee'd thoroughly to remove any contaminants or residue that may be on the paint surface. Some of our customers choose to have their paint polished to get rid of any nasty swirls [
Have you ever seen a 800hp C7 Corvette from the factory? Well look no further! We had the opportunity to apply some of our services on this brand new #01 of 50 C7 Grand Sport. Our customer just bought this vehicle and wanted to protect his investment. We decided to perform our New Car Prep, Xpel clear bra and window tint. The New Car Prep was recommended to remove any swirls/scratches, decontaminate the paint and help bring a deep gloss out of the factory black paint. Since we just polished the paint, Xpel Ultimate Self Healing clear bra was applied to the front end of the vehicle to protect it from any rock chips or road debris. Lastly, we couldn't have our customer fish bowlin' around town so we add some Suntek Carbon window film! Continue reading below to see the entire process and some images after all of our work was complete!
Straight from the dealership, this vehicle had some slight scratches, swirls and water spots. Since this vehicle is getting Xpel film on it. We needed to proceed with our New Car Prep first so the paint surface was perfect before the protective film was applied. The images below show you how the vehicle arrived to us.
The first step in the entire process is to thoroughly wash and clay the vehicl [.
Recently we had this gorgeous Avus Blau Metallic BMW M3 in our shop for some Xpel Ultimate clear bra and CQuartz Finest coating application! Our customer wanted to make sure his BMW Individual color will stay looking pristine for years to come. He decided to get the full front end and some high impact areas protected with Xpel Ultimate self-healing film. To top it all off, we applied a CQuartz Finest coating. We previously did the same exact treatment with our shop BMW M4 which is also a BMW Individual color, Laguna Seca Blue Metallic.
Last week, we had a Verde Scandal, Lamborghini Huracan come in wanting some XPEL paint protection film services completed. To protect the full front end, we used XPEL Ultimate self healing film for maximum protection. While we had the Lamborghini in our shop, we noticed a few scratches on the roof. We mentioned these to the customer and he wanted us to go ahead and take care of them for him. Continue reading to see what went into making this Lamborghini Huracan flawless!
The first step in the process was to wash off the car and prep it for its polish!
One of our most customers brought his newly purchased, 16′ BMW M4 Competition, to us wanting to protect its pristine paint finish with Xpel Ultimate self healing film. We recommended getting the full front end protected. Full front end protection includes: Full hood, full fenders, mirrors, front bumper and headlights. XPEL Ultimate’s special clear coat not only prevents the film from discoloring due to contamination and ultra-violet radiation, but also heals itself from swirl marks and light scratches that can occur through ordinary washing and drying or daily driving. You can rest assured that your film and paint will stay looking perfect due to the films mirror smooth finish! Let us show you what we did with our customers M4 Competition!
First we must wash the vehicle to make sure there are no contaminants or debris on the car before we lay the film.
Our customer purchased a 16′ Porsche Cayman GTS wanting to protect and keep his new car looking just like it did when he drove it off of the showroom floor. We recommended going with XPEL Ultimate self healing paint protection film on the front end to protect the car from the everyday hazards of driving. To keep the car looking like it did the day he purchased it, we applied CQuartz Finest ceramic paint coating to the entire car. He also wanted to make a few changes to the Cayman that we were more than happy to do for him! These changes included window tint, Rennline mesh grill kit and AWE Tuning wind deflectors.
Take a look at the final product. This Cayman GTS will stay looking like this for years to come!
One of our customers wanted to protect his brand new BMW M2 from all of the harsh hazards of everyday driving and the occasional track days. We recommended that he protect the entire front end of his M2. Full front end coverage includes the entire hood, side mirrors, front bumper, fenders, headlights and he also wanted to cover his a-pillars / partial roof. The first step of the installation process is to wash the car and bring it into our dedicated installation bay. This ensures us that no contaminates will get on the film or vehicle during the installation process. Also, during this process we use an alcohol based solvent to get any leftover contaminants off of the paint.
Now that the paint surfaces have been properly prepped and the vehicle is in our installation bay, it is now time to lay the film! A gel is applied to the cars surface to allow [...]
Our customer brought his brand new Alfa Romeo 4C to us for a number of services he wanted completed. First on the list, was to remove the already yellowing paint protection film that was previously installed on the vehicle. This is a common issue with lower quality film.
Now that the old paint protection film has been removed, we began the process for our New Car Prep. This step is necessary for all vehicles that receive a ceramic paint coating from us. This process decontaminates the paint surface while simultaneously removing swirl marks, bringing the paint to a high gloss finish and creating a smooth surface for the coating to adhere to.